Tag: pure storage

Posted on

Updated Pure Storage Content Pack for vRealize Log Insight 2.5

VMware vRealize Log Insight is a product I have been quite fond of since it first came out–I liked it for a variety of reasons–one is the simplicity of use. As far as VMware’s entire management suite, it is the easiest to install/configure and understand how to use. You can really become an accomplished user in a day. Anyways, I finally got around to updating the Pure Storage FlashArray Content Pack to expand support for version 2.5 and also leverage some new functionality from Purity syslog messages.

titleimage

 

Continue reading “Updated Pure Storage Content Pack for vRealize Log Insight 2.5”

Posted on

Updated VMware and Pure Storage Best Practices Guide

Update: Please see this page for latest updates on best practices and relevant links.

Quick post here. I have updated the Pure Storage FlashArray Best Practices Guide for VMware vSphere. Not a total overhaul but there are some changes to note.

cover

Updates include:

  • New information for vSphere 6.0 This mostly focuses on what supports vSphere 6.0 and re-enforcing that current best practices remain the same. Expect a lot more vSphere 6 content though in forthcoming updates. As new storage features are tested and considered in the latest version of the VMware platfom they will be included in this guide, such as VVols.
  • Queue Depth changes are no longer mentioned in this document. Messing with this is considered a tweak that most people will not need. Don’t broke what isn’t broken is the mantra here.
  • More instruction on iSCSI setup and clarified instruction.
  • General tightening and simplification of the document
  • New content pack for Log Insight (which will be out soon). The changes are detailed in the document

 

Posted on

Direct Guest OS UNMAP in vSphere 6.0

This is certainly not my first post about UNMAP and I am pretty sure it will not be my last, but I think this is one of the more interesting updates of late. vSphere 6.0 has a new feature that supports the ability for direct UNMAP operations from inside a virtual machine issued from a Guest OS. Importantly this is now supported using a virtual disk instead of the traditional requirement of a raw device mapping.

Continue reading “Direct Guest OS UNMAP in vSphere 6.0”

Posted on

Another look at ESXi iSCSI Multipathing (or a Lack Thereof)

I jumped on a call the other day to talk about iSCSI setup for a new FlashArray and the main reason for the discussion had to do with co-existence of a pre-existing array from another vendor. They were following my blog post on iSCSI setup and things didn’t quite match up.

To setup multi-pathing (the recommended way) for Software iSCSI is to configure more than one vmkernel port that each have exactly one active host adapter (physical NIC). You then add those vmkernel ports to the iSCSI software adapter and the iSCSI adapter will then use those specific NICs for I/O transmission and load-balance across those ports.

Continue reading “Another look at ESXi iSCSI Multipathing (or a Lack Thereof)”

Posted on

PowerCLI Script to Create VMware Clusters on the FlashArray

The first step prior to provisioning storage on the FlashArray is to actually create the host records on the array itself. These records, in their most basic form, are just names of hosts with associated WWNs or IQNs. Pretty simple process in general, but as these VMware clusters get larger and larger (vSphere 6.0 now allows 64 hosts per cluster) scripting this configuration becomes a bit more appealing. Granted, this is a one-off operation, but still saves you from a tedious task. So I wrote one. This script also integrates setting the best practices on the ESXi hosts in the cluster and in the case of iSCSI adds the FlashArray iSCSI ports as a target on the host software iSCSI adapters.

intro

Continue reading “PowerCLI Script to Create VMware Clusters on the FlashArray”

Posted on

Setting up iSCSI with VMware ESXi and the FlashArray

I’ve been with Pure Storage for about ten months (time flies!) and a noticeable trend I’ve seen in the past six or so months is in the number of customers who are deciding to use iSCSI as their storage protocol of choice. This is increasingly common in greenfield environments where they don’t want to invest in a Fibre Channel infrastructure. I’ve helped quite a few set this up in VMware environments so I thought I would put a post together on configuring ESXi software iSCSI with the Pure Storage FlashArray (I have yet to see a hardware iSCSI setup).

Before I begin, I highly recommend reading the following two documents from VMware:

http://www.vmware.com/files/pdf/iSCSI_design_deploy.pdf

http://www.vmware.com/files/pdf/techpaper/vmware-multipathing-configuration-software-iSCSI-port-binding.pdf

They are not long and provide very good insight into the how/what/why of iSCSI on VMware. Some of the images are a bit old, but the underlying concepts have not changed. Continue reading “Setting up iSCSI with VMware ESXi and the FlashArray”

Posted on

FlashArray XCOPY Data Reduction Reporting Enhancement

Recently the Purity Operating Environment 4.1.1 release  came out with quite a few enhancements. Many of these were for replication, certain new GUI features and the new vSphere Web Client Plugin is included. What I wanted to talk about here is a space reporting enhancement that was made concerning VAAI XCOPY (Full Copy). First some history…

First off a quick refresher on XCOPY. XCOPY is a VAAI feature that provides for offloading virtual disk copying/migration inside of one array. So operations like Storage vMotion, Cloning or Deploy from Template. Telling an array to move something from location A to location B is much faster than having ESXi issue tons of reads and writes over the SAN and it also therefore reduces CPU overhead on the ESXi host and reduces traffic on the SAN. Faster cloning/migration and less overhead–yay! This lets ESXi focus on what it does best: manage and run virtual machines while letting the array do what it does best: manage and move around data. Continue reading “FlashArray XCOPY Data Reduction Reporting Enhancement”

Posted on

Pure Storage FlashArray SRA for Site Recovery Manager

I’ve have been working with VMware’s vCenter Site Recovery Manager since the tail end of the 1.x release and I have to say this is the most excited I have been about a Storage Replication Adapter release that I can remember. Since I started with Pure in late April 2014 I have been working with our development team and product management to design and shape this initial release of the Pure Storage SRA. I have to say it has been a blast–a really great team that does some really amazing work! It is now officially approved and posted on VMware’s  compatibility guide and SRA download site:

http://www.vmware.com/resources/compatibility/detail.php?productid=38264&deviceCategory=sra&details=1&partner=399

https://my.vmware.com/group/vmware/details?downloadGroup=SRM_SRA55&productId=451

srmpure

Continue reading “Pure Storage FlashArray SRA for Site Recovery Manager”

Posted on

FlashRecover replication on the Pure Storage FlashArray

Last year Pure Storage introduced built-in replication on the FlashArray 400 series in our Purity Operating Environment version 4.0. Our replication offers a variety of benefits–they center around two things. First it is completely free. There is no license charge for replication itself or by capacity. If you need to have is two FlashArrays and a TCP/IP network between the two of them to replicate over. No additional hardware to buy for the array or license packages required (all of our software is always free). Secondly, it is very easy to use–from a green field array to replicating volumes takes maybe five minutes–in reality probably far less than that. So I wanted to take some time to review how our replication is setup and how it works. I went over replication briefly when we released Purity 4.0, but I think it is time for a closer look.

replication

Continue reading “FlashRecover replication on the Pure Storage FlashArray”